YUCHENGTECH AM300W-O LCD Large Color Screen Lab Med Beauty Electric Mixer Blender High Accuracy Agitator Vertical Brushless DC Mixer 50L (Water) 100-240V

Product Introduction 1.The agitator is suitable for the laboratory, food industry and cosmetics industry. 2.This machine is driven by no carbon brush dc motor, so it’s suitable to agitate low viscosity liquid or to agitate high viscosity liquid. 3. This product can effectively compensate the variation of the rotational speed caused by the load change and the power supply voltage fluctuation, and the constant speed is reliable. Parameters: Rated voltage: AC100-240V Rated frequency: 50/60 Hz Input power: 440 W Output power: 300 W Drive Type: Brushless DC Motor Mixing shaft output torque: 71.6n.cm Mixing shaft output peak torque: 212.0 n.cm Working mode: S1 (continuous) Operating State Display: LCD Operation control mode: combined control knob Speed regulation range: 30-2000 rpm Speed Control Type: Stepless Timing control range: 1-6000 min Transfer dynamic monitoring function: Yes Torque dynamic simulation function: Yes Temperature dynamic monitoring function: Yes Speed memory function: Yes Overload protection function: Yes Fixing method of stirring rod: fast rotary chuck Clamping range of rotary chuck: 2-13 mm Penetration Diameter of Stirring Bar (Shutdown): 11 mm Agitator configuration: four-blade propeller Stirring capacity (H2O): 50 L Stirring treatment viscosity: 100000 mPa.s Permissible ambient temperature: not more than 40℃ Permissible relative humidity: not more than 80% Protection Level: IP 40 Shape size of the whole machine: 215 x 310 x 720 mm Whole machine weight: 14.5 kg

• 1.Super torque, electronic constant speed mixer is driven by brushless DC motor, which is suitable for agitation speed, competent for high viscosity media, slurry mixing.
• 2.Running timing control to ensure that the experimental timeliness is effectively controllable. Digital display settings and actual output of stirring speed ensure the intuitive acquisition of experimental data.
• 3. The structure of the machine is reasonable and compact. The ultra-low noise and stirring speed are controlled by microprocessor. It can compensate for the change of speed caused by the change of load and the fluctuation of power supply voltage in time and effectively. The speed is constant and reliable.
• 4. The built-in automatic overload protection device ensures the safety of long-term and high-load continuous operation of the experiment.
• 5. The knob-type control of the running state makes the operation of the experiment more simple and the speed of stirring can be adjusted steplessly to meet the requirement of adjusting the speed of stirring at any time in the experiment.