INTSUPERMAI Heating Mantle 220V Analog Digital Magnetic Stirrer Heating Mantle 5000ml, 0~1400rpm, 800W, Max 842℉, with Support Stand and Temp. Sensor

Notice: This Heating Mantle is 220V, please confirem it before the payment, Thanks. Please make sure all the fittings are installed, to determine the liquid inside the flask, then heat. And make sure the temperature is below 380℃. Item Included: 1 set of 220V Heating Mantle(020208) Parameters: Voltage: 220V Capacity: 5000ml/1.32gal Power: 800W Speed: 0-1400rpm Max. use tem.: 300℃ Tem. Range: Ambient tem.: ～40℃ Sensor: PT100 Working mode: continuous Ambient temperature: 5~40℃; Ambient humidity: ≤90%; Usage notes 1. Because of the surface of heat insulation material is coated with grease, in the first used shall first heat except when heating oil, will appear white smoke, shut off the power after heating to smokeless, when the temperature come down, it can normal use 2. When use the instrument should pour the liquid into the container firstly, and then put in the instrument to use. Storage and transportation Keep it in dry and clean room with good ventilation and no corrosive gas, prevent it from wetting by the rain and avoid violent collision in transportation.

• 【Intelligent temperature regulation】This magnetic stirrer is 220V and 5000ml stirring capacity, which is very efficient. It uses electronic temperature control technology, it can control the temperature rise and fall to achieve constant temperature heating. It is 220V and 5000ml stirring capacity, which is very efficient.
• 【The liner】This heating mantle adopts alkali free glass fiber as insulation material, using high quality nickel-chrome heating resistance wire sealed in high temperature insulation layer, with characteristics of large heating area, fast warm-up, high temperature evenness, no open flame and so on.
• 【The temperature probe】 This heating mantle is digital heating and stirring type, it equipped with temperature sensor makes the experimental temperature control more accurate.
• 【The heating sleeve core】This heating mantle adopts high quality heating sleeve core, woven into half the ball in heating sets, which is fast heating, high temperature resistance, good heat preservation effect, and it can withstand up to 380 degrees Celsius.
• 【The insulation shell】This heating mantle applies one time molding, cold rolling sheet stretchingelectrostatic molding process, the appearance is beautiful and not easy to be damaged.